Process Control Instruments and Field Devices
SKU# (186)

ENDRESS+HAUSER  CUE22-A1A

ANALYSIS / TURBIDITY METERS
GENERAL PURPOSE

ENDRESS+HAUSER CUE22-A1A (1)
  • Overview
  • Features
  • Specs
  • Related
  • Literature

EH Turbimax CUE22 online turbidity meter with sample condition adjustment. White Light Measurement. 0 - 100 NTU measurement range. 100-240 VAC. Automatic ultrasonic cleaning function. ABS Housing. IP66.*** Phased out ***

Inquiry

Application

On-line continuous monitoring of clean water:

  • Drinking water
  • Treated process water
Your benefits
  • Versions with white light source and infrared light source
    • available
  • Fast and easy calibration
    • Complete primary calibration in less than 5 minutes
    • Verification in seconds
  • Reduced calibration costs and quick response times thanks to low
    • volume sample chamber
  • Automatic continuous ultrasonic cleaning (Autoclean) increases
    • cleaning intervals dramatically
  • Simple modular design
  • Easy to use and service
  • Affordable thanks to modular microprocessor based technology
  • Digital high-speed connections through RS-485 with Modbus Optional Features:
    • Flow chamber for bubble suppression
    • Reusable calibration kit
Optional Features:
  • Flow chamber for bubble suppression
  • Reusable calibration kit
Measuring principle Turbidity measurement

For turbidity measurement a light beam is sent through the medium and is diverted from its original direction by optically denser particels, e.g. solid matter particles.

Measuring Principle Single beam scattered light
Application Online continuous monitoring of clean water :
- Drinking water
- Treated process water
Installation Compact device for bypass-installations.
Characteristic " Versions with white light source
" Fast and easy calibration
" Complete primary calibration in less than 5 minutes
" Verification in seconds
" Reduced calibration costs and quick response times thanks to low volume sample chamber
" Automatic continuous ultrasonic cleaning (Autoclean)increases cleaning intervals dramatically
" Simple modular design
" Easy to use and service
" Affordable thanks to modular microprocessor based technology
" Digital high-speed connections through RS-485 with Modbus
Optional Features:
" Flow chamber for bubble suppression
" Reusable calibration kit
Measurement range 0 - 100 NTU
Measuring principle Turbidity measurement using standardised 90° scattered light method acc. to U.S.EPA180.1 (White Light)
Design The transmitted white light beam is scattered by the solid matter particles in the medium. The scattered light beams are detected by scattered light receivers which are arranged at an angle of 90° to the white light source.
Material Housing: ABS
Flow-through head: Nylon
Sample cuvette: Borosilicate glass
Sample cuvette seal: Silicone
Flow-through fittings: Polypropylene
Flow-through lock down pins: Stainless steel (AISI 304 or AISI 303)
Inlet tube: Stainless steel (AISI 316)
Dimension 347,16 x 207,65 x 196,85 mm
(13.66 x 8.17 x 7.75 inches)
Process temperature 1°C - 50°C
(34 - 122°F)
Process pressure max. 13.78 bar / 200 psicontrolled by integral pressure regulator
Ingres protection IP66
Output 4-20mA, galvanic isolated
Bi-directional RS-485, Modbus optional.

  • TURBIDITY METERS > GENERAL PURPOSE
    CUE21-A1A EH Turbimax CUE21 online turbidity meter with sample condition adjustment. Infrared Measurement. 0 - 1000 NTU measurement range. 100-240 VAC. 4-20 mA or RS-485 output. Automatic ultrasonic cleaning function. ABS Housing. IP66. ..

> GENERAL PURPOSE :    47 Items found.
CPS31-1AB2ESA
(378)

ENDRESS+HAUSER  CPS31-1AB2ESA

EH Ceratex CPS31 analog pH glass electrode for application in drinking water and swimming pools. 1 - 12 pH measurement range. Corrosion and moisture resistant. 60 psi max pressure. IP68.

Configure

 
CPS71-1TB2ESA
(389)

ENDRESS+HAUSER  CPS71-1TB2ESA

EH Ceragel CPS71 Analog pH glass electrode for sterile and hygienic applications. Poison resistant. 188psi max pressure. IP68.

Configure

 
CPS72-0PT2ESA
(390)

ENDRESS+HAUSER  CPS72-0PT2ESA

EH Ceragel CPS72 Analog ORP glass electrode for sterile and hygienic applications. Poison resistant. 230psi max pressure. IP68.

Configure

 
CPS31D-7AC21
(287)

ENDRESS+HAUSER  CPS31D-7AC21

EH Memosens CPS31D digital pH glass electrode for application in drinking water and swimming pools. Corrosion and moisture resistant. 60 psi max pressure. IP68.

Configure

 
CPS92-0PB2ESA
(288)

ENDRESS+HAUSER  CPS92-0PB2ESA

EH Orbipore CPS92 analog ORP glass electrode for highly turbid media. IP68. 189psi max pressure. Platinum measuring surface.

Configure

 
CPF201-C1A
(375)

ENDRESS+HAUSER  CPF201-C1A

EH Purisys CPF201 Analog pH glass electrode for pure and ultrapure water. 1-13 pH measurement range. 43.5psi max pressure. IP68.

Configure

 
CM72-AAADB1C1A1A1
(354)

ENDRESS+HAUSER  CM72-AAADB1C1A1A1

EH Liquiline CM72 1 channel small glass electrode transmitter for Memosens Sensors (ph, ORP, conductivity and oxygen). PEEK Housing. IP67 and IP68. 4-20ma Output. CSA Approval.

Configure

 
COS41-8S
(349)

ENDRESS+HAUSER  COS41-8S

EH Oxymax COS41 2-electrode amperometric sensor for the measurement of Dissolved Oxygen (O2) on water and wastewater applications. 0,05 - 20mg/l measuring range. Integrated NTC temperature sensor.

Configure

 
CCS50D-AA11BF
(350)

ENDRESS+HAUSER  CCS50D-AA11BF

EH Memosens CCS50D Digital Sensor for Amperometric measurement of dissolved Chlorine Dioxide (Cl2) in process and drinking water. 0-5 to 0-200 mg/l ClO2 range. Integrated 10k NTC temperature sensor.

Configure

 
CLD18-AGCP
(300)

ENDRESS+HAUSER  CLD18-AGCP

EH Smartec CLD18 toroidal system for inductive conductivity measurement in hygienic applications. Includes compact transmitter and Stainless steel Pt1000 temperature sensor. 200 µS/cm - 1000 mS/cm measurement range. IP69.

Configure

 
CLS54D-AAMV5A2A
(301)

ENDRESS+HAUSER  CLS54D-AAMV5A2A

EH Indumax CLS54D Digital Memosens toroidal conductivity sensor for hygienic and sterile applications. Inductive cell. Corrosion and moisture resistant. DN50 Process Connection. PEEK material. Integrated Pt1000 temperature sensor. IP68.

Configure

 
CCS140-A
(171)

ENDRESS+HAUSER  CCS140-A

EH CCS140 analog free chlorine disinfection sensor for industrial and pool water treatment. Amperometric and membrane-covered. 0,05 - 20ppm free chlorine measurement range (pH 4 - 8,2). Optional NTC-temperature sensor. For installation in the CCA250 assembly.

Configure

 
CCS240-N
(329)

ENDRESS+HAUSER  CCS240-N

EH CCS240 Analog disinfection sensor for standard measurement of Chlorine Dioxide (Cl2) 0,05 - 20ppm. Amperometric and membrane-covered. NTC-temperature sensor.

Configure

 
CM82-AAXAB2C1A1A1
(355)

ENDRESS+HAUSER  CM82-AAXAB2C1A1A1

EH Liquiline CM82 1 channel small glass electrode transmitter for Memosens Sensors (ph, ORP, conductivity, oxygen and chlorine). Configurable multiparameter. PEEK Housing. IP67 and IP68. 4-20ma and HART Outputs. Optional Bluetooth. CSA Approval.

Configure

 
CCS120-AS0
(170)

ENDRESS+HAUSER  CCS120-AS0

EH CCS120 analog total chlorine (HOCl, OCl, chloramines) disinfection sensor for all water and wastewater applications. 0,1 - 10ppm total chlorine measurement range (pH 6,5 - 9,5). NPT 3/4" Thread. Includes NTC-temperature sensor and TOP68 plug-in head.



 
COS61-A0F0
(180)

ENDRESS+HAUSER  COS61-A0F0

EH Oxymax COS61 dissolved and optical sensor for the measurement of Oxygen (O2) in water, wastewater and utilities applications. High performance sensor: Fast and accurate. 0 to 400hPa measuring range. Stainless steel sensor body. G1" thread process connection. NTC temperature sensor included.

Configure

 
CYZ71D-AAB110
(273)

ENDRESS+HAUSER  CYZ71D-AAB110

EH Memobase Plus CYZ71D multichannel multiparameter software for liquid analysis with digital Memosens sensors. Includes USB cable, sensor connection box MemoLink and Memosens lab cable CYK20 optionally.

Configure

 
COS22-AA1A2B22
(177)

ENDRESS+HAUSER  COS22-AA1A2B22

EH Oxymax COS22 analog sensor for the measurement of Oxygen (O2) with long-term stability for frequent sterilizations and autoclavability. 0 to 400 hPa (0 to 6 psi) measuring range. Fluorelastomer FDA Process Sealing. Integrated temperature sensor.

Configure

 
CLD134-E00030AA1
(304)

ENDRESS+HAUSER  CLD134-E00030AA1

EH Smartec CLD134 toroidal system for inductive conductivity measurement in hygienic applications. Includes compact transmitter and Stainless steel Pt1000 temperature sensor. 100 µS/cm - 2000 mS/cm measurement range. IP67.

Configure

 
COS61D-AAA1A2
(181)

ENDRESS+HAUSER  COS61D-AAA1A2

EH Oxymax COS61D digital memosens and optical sensor for measurement of Oxygen (O2) in water, wastewater and utilities applications. Fast and accurate sensor. 0 to 400hPa measuring range. Stainless steel sensor body. G1" thread process connection. NTC temperature sensor included.

Configure

 
Page: 1 | 2 | 3 | All
     NEWS & CASES      
() Reviews | Write One
Previously Viewed
CUE22-A1A
Industrial Automation Services
Industrial Automation Services with PLC and SCADA

About Contact Request Imprint Terms and Conditions Privacy Sell Here Newsletter My Orders Shopping Cart

Partners:
For enquiries relating to potential partnerships or joint venture ideas,
send an email to sales@instrumentsandcontrol.com or call us at 281-643-0080.

Powered by: macroKom Industrial B2B e-Commerce Engines
Industrial B2B E-Commerce Infrastructure
   + Deployment Services by Miramar Automation
  • Packaged E-Commerce platform, off-the-shelf storefronts
  • CPQ (Configure Price Quote) Web Services and Product Content Management Tools
  • Integration with backend systems (QuickBooks, StoreQuotes, Order Processing)
  • Customer relationship management (CRM) tools
  • Multi-Store