Application
Indumax CLS50/CLS50D is particularly suitable for use in the chemical industry and
process engineering. The six-decade measuring range and the excellent chemical
resistance properties of the materials in contact with the medium (PFA or PE
- Concentration measurement of acids and bases
- Quality monitoring of chemical products in tanks and pipes
- Phase separation of product/product mixtures
The CLS50D digital sensor is used with Liquiline CM44x or Liquiline M CM42, while
the CLS50 analog sensor is used with the Liquiline M CM42, Liquisys CLM223/253
or Mycom CLM153 transmitters.
Your benefits
- High durability
- High chemical resistance thanks to PFA coating
- PEEK version for temperatures up to 180 °C (356 °F)
- Low risk of soiling
- Dirt-repellent PFA surface
- Large sensor opening
- Easy installation
- Can be installed in pipes ≥ DN 80
- Total cable length up to 55 m (180 ft)
- Large measuring range from 2 μS/cm to 2000 mS/cm
- Integrated, coated Pt 100 temperature sensor, error class A
- Ex approval Ex ia IIC T4/T6
Other advantages of Memosens technology
- Maximum process safety
- Data security thanks to digital data transmission
- Very easy to use as sensor data saved in the sensor
- Predictive maintenance possible as sensor load data logged in the sensor
Measuring principle
An oscillator (1) generates an alternating magnetic field in the primary coil (5), which induces a
current flow (4) in the medium. The strength of the current depends on the conductivity and thus on
the ion concentration in the medium. The current flow in the medium, in turn, generates a magnetic
field in the secondary coil (3). The resulting induced current is measured by the receiver (2) and used
to determine the conductivity.